ZKRV-160E REDUCE
160E FRONT 160E BACK
Technical Parameters
Table 1 Operating parameter
Output Rotational speed r/min Model
| 5 | 15 | 25 | 35 | ||||
Output torque | Input capacity | Output torque | Input capacity | Output torque | Input capacity | Output torque | Input capacity | |
Nm | kW | Nm | kW | Nm | kW | Nm | kW | |
160E | 2215 | 1.49 | 1600 | 3.41 | 1358 | 4.77 | 1215 | 5.89 |
Note: the rated torque is the output torque when the output speed is at 15r/min.
Table 2 Performance Parameter
Model | Speed ratio | Allowable output speed | Maximum backlash | Allowable acceleration/decleration torque | Momentary max allowable torque | Allowable moment | Momentary max allowable movement | Weight | Efficiency | Noise | |
Shaft (R) | Housin | r/min | arc.min | Nm | Nm | Nm | Nm | kg | % | dB | |
160E | 81 | 80 | 45 | 1 | 4000 | 8000 | 3840 | 7680 | 26.4 | >80 | <75 |
101 | 100 | ||||||||||
129 | 128 | ||||||||||
145 | 144 | ||||||||||
171 | 170 |
Table 3 Installation parameter
inner hexagon bolt Nominal dimension(mm) | fastening torque(Nm) | fastening force | bolt requirement |
M8 ×1.25 | 37.2±1.86 | 23960 | GB/T 70.1-2000 intensity:12.9 thread requirement:GB/T 1167-1996 |
M16×2.0 | 318.5±15.9 | 103410 |
Installation drawings